Products
-
MILLING & DILLING TABLE
Optional accessories T-slots are 5/8″ wide by 7/16″ deep with an undercut to provide for T-nut hold down for fixtures jigs and other clamping devices Small low silhouette table for light word. The Milling and Drilling Table fastens quickly to drill-press table using central base bolt. With adjustable gibs. Height 4-3/4″ Base 6-3/4″ Dia, with 1-1/8″long bolt Width 7″ Depth 7″ Weight: 25 lbs. Approx Item No: 531050 ... -
HORIZONTAL ROTARY TABLE
The TS series horizontal rotary tables are for indexing,circular cutting,angle setting,boring,spot tacing operations and similar work in conjunction with a milling machine. A flange for connecting scroll chuck is special supplied.an be packed independent.For special order,the dividing plates accessory allows the operator to accurately divide the 360º rotation of the clamping surface into divisions of 2 through 66,and all divisible of 2,3and 5 from 67-132. MAIN SPECIFICATIONS TS160A TS... -
CROSS SLIDE TABLE WITH SWIVEL BASE
Model A B C D E F G H J K X travel Y travel Packing size NW/GW Item No. 302 225 175 12 72 138 175 232 195 96 105 90 36×36×20 10/11 531011 303 330 220 12 72 155 280 260 240 200 96 190 100 41×36×19 16/17 531013 304 425 240 12 72 165 224 340 250 250 96 225 150 60×44×19 23/26 531015 305 600 240 12 72 165 224 340 250 250 144 400 150 ... -
CROSS SLIDE TABLE
Model A B C D E F G H J K X travel Y travel Packing size NW/GW Item No. 201 185 100 10 35 102 170 130 115 100 96 80 50 28×28×17 10/11 531001 202 225 175 12 72 108 225 175 148 160 96 105 90 36×36×20 16/17 531003 203 330 220 12 72 115 275 220 200 200 96 190 100 41×36×18 23/26 531005 204 425 240 12 72 125 335 276 240 245 144 225 150 ... -
ANGLE TABLE
Optional accessories Adjustable. Heavy castings and rugged construction Graduation in degrees in 0 to 90° range 2 Screw lock setting Saves setup time Machined T: slots Precision made Table Size Height Weight Item No 5″×6″ 2004/1/2 12 Lbs. 531054 6″×8″ 5″ 26 Lbs. 531056 8″×10″ 2006/1/2 62 Lbs. 531058 10″×12″ 8″ 110 Lbs. 531060 12″×16″ 9R... -
REVERSIBLE TAPPING CHUCK
With torque safety device Adjustable torque With reversible device With Morse connective bar Item No Model d D D1 L L1 Caipacity MS. NO 576375 JSN7 2.5-6.5 23 55 135 95 M2-M7 MS1 MS3 576380 JSN12 3.5-10 28 75 164 114.5 M5-M12 MS3 MS4 576385 JSN20 6-14 38 90.5 205 135 M8-M20 MS3 MS4 -
RADIUS AND ANGLE DRESSER
This dresser can be used on all O.D, I.D Surface grinding operations. With this radius and angle dresser grinding of the following forms can be Item No. Outer diameter Center Overall Satting hefefor Mounting base of grinding weel height length diamond resser (Length×Width) 575020 mm in mm in mm in mm in mm in 300 11.81 86,36 3.4 387 15.24 9.525 3/8 134×105 5.27×4.31 -
WEDGE TYPE QUICK CHANGE TOOL POST AND HOLDER SETS
Wedge type Tool Post Sets: 1 Tool Post，5 Tool-holders Item NO. EACH SET INCLUDES 551-111 250-110-00 250-110、250-101、250-102、250-104、250-107、250-110 551-222 250-220-00 250-220、250-201、250-202、250-204、250-207、250-210 551-333 250-330-00 250-330、250-301、250-302、250-304、250-307、250-310 551-444 250-440-00 250-440、250-401、250-402、250-404、250-407、250-410 -
WEDGE TYPE QUICK CHANGE TOOL POST
Item NO. A(in) B(in) C(in) D(in) Swing dia(in) 550-111 2-1/2 3-7/8 2-1/4 9/16 12 550-222 3 4-5/8 2-3/4 5/8 10-15 550-333 3-3/8 5-1/8 3 3/4 13-18 550-444 4 6-1/4 3-5/8 7/8 14-20 -
QUICK CHANGE TOOL HOLDERS,UNIVERSAL PARTING BLADE HOLDER NO.7
Use square tool to make slot cut off etc. Item NO. A(in) B(in) C(in) Blade height(in) 550-107 250-107 3/16 1/2 1-1/2 1/2 550-207 250-207 3/16 11/16 1-3/4 11/16 550-307 250-307 3/16 3/4 2 3/4 550-407 250-407 1/4 7/8 2-1/2 7/8 -
QUICK CHANGE TOOL HOLDERS,TURNING AND FACING HOLDERS No.4-41
Use straight shank drilling and reaming, boring etc.Equipped with a split bushing to accommadate a boring bar of small diameter.It grips with extreme rigidity.Cuts smoothly without chatter. Item NO. A(in) B(in) C(in) D(in) Swing dia(in) 550-104 250-104 3/4 1-1/2 5/8 3/4 3/4 550-204 250-204 7/8 1-3/4 3/4 1 1 550-304 250-304 1 2 3/4 1 1 550-404 250-404 1-1/4 2-1/2 1 1-1/4 1-1/4 550-141 250-141 7/8 1-3/4 ... -
QUICK CHANGE TOOL HOLDERS,TURNING AND FACING HOLDERS No.2
V groove hold round shank boring bars and tools as well as square tool bits to machine end face,external,cutting,boring etc. Item NO. A(in) B(in) C(in) D(in) Swing dia(in) 550-102 250-102 1 1/2 29/64 1-1/2 3/16-1/2 550-202 250-202 1-1/8 5/8 1/2 1-3/4 1/4-5/8 550-302 250-302 1-7/16 3/4 5/8 2-1/8 1/2-3/4 550-402 250-402 1-23/32 1 3/4 2-1/2 1/2-1
