VHM series standard equip with V&H two spindles, lifting motor
Model | Unit |
VHM30A 300×1300 |
VHM30A 300×1500 |
VHM30B 300×1370 |
VHM30B 300×1500 |
|
Item No. |
132020 |
132021 |
132030 |
132031 |
||
Table size | mm |
300×1300 |
300×1500 |
305×1370 |
305×1500 |
|
Table longitudinal travel | mm |
845 |
1000 |
880 |
1000 |
|
Table cross travel | mm |
385 |
385 |
380 |
380 |
|
Knee vertical travel | mm |
435 |
||||
Knee rapid speed | mm/min |
900 |
||||
Vertical Spindle |
motor power | HP |
5 |
Standard 3HP, Optional 5HP |
||
Spindle speed | r/min |
standard:shift grade16steps, 50HZ: 65~4500 60HZ: 80~5440 |
||||
Spindle taper |
ISO40 |
R8(optional ISO30/40) |
||||
Quill travel | mm |
127 |
||||
quill feed rate | mm/rev |
0.04/0.08/0.15 |
||||
Head rotating |
(R/L):90 |
(R/L):90, (up/down): 45 |
||||
Distance from spindle end to table surface | mm |
115-545 |
||||
Horizontal Spindle |
motor power | HP |
5 |
|||
Spindle speed | r/min |
50hz:45/80/165/260/500/980, 60hz:55/100/200/315/600/1180 |
||||
Spindle taper |
ISO40 |
|||||
Distance from spindle center to table | mm |
-20~410 |
||||
Distance from spindle center to ram | mm |
183 |
||||
Ram travel | mm |
483 |
||||
Ram rotating |
360 |
|||||
Net weight | kg |
1900 |
1950 |
1680 |
1730 |
|
package size (L*W*H) | cm |
180*150*220 |
180*180*220 |
180*160*220 |
180*180*220 |
Standard equipment:
Electro cabinet and hung up control panel
Knee rapid elevating motor
Cooling system
Electro lubricate pump
Draw bar
Oil collecting plate
Working lamp
Plastic splashing guard
Leveling wedge and screw
Optional equipment:
X/Y axis inverter motor power feed 0-3500mm/min
X/Y axis gear box power feed
X/Y axis power feed
Digital readout
Air draw bar (for vertical spindle)
Horizontal milling tools arbor
Inverter vertical milling head
Variable speed vertical milling head